Seiten

Monday, 28 February 2022

Design Properties for Plastics Engineering: Key Electrical Properties of Selected Engineering and High Performance Polymers for E-Mobility

Hello and welcome to a new blog post. Today I present to you selected electrical properties of the most used engineering and high performance polymers. The data can support you during polymer material selection for various electric car applications.

In general, polymers in electric vehicles are used as isolators, insulators, and component housings and find many electrical focus applications such as busbars, connectors, circuit breakers, modules and switches that carry a current. At the same time, the demand for polymers is increasing in several property dimensions such as thermal rating, EMI shielding and thermal conductivity. Also, looking at autonomous driving systems, relative permittivity is a major concern and new plastic compounds are developed to offer solutions (low absorption or reflection of radar signals at 80 GHz [2]). In part design, we see more and more miniaturization resulting in a higher heat exposure to the polymer in use. Thinner walls represent another challenge for polymers to fill all the mould cavity.

In addition, environmental aspects play a key role in the use of plastics too. As already discussed in this post [3], the trinity of thermal, chemicals and time need to be considered since polymers change their behavior if exposed to chemicals and temperature.

Below the table shows the key electrical properties of selected engineering and high performance polymers for e-mobility. 

Key Electrical Properties of Selected Engineering and High Performance Polymers for E-Mobility 

Also, check out my training videos to better understand the individual properties: 

Polymers For E-Mobility I Electrical Design Properties I Part 1

Polymers For E-Mobility I Electrical Design Properties I Part 2 - Flammability Ratings

Polymers For E-Mobility I Electrical Design Properties I Part 3 - Comparative Tracking Indices (CTI)

Polymers For E-Mobility I Electrical Design Properties I Part 4 - Electromagnetic Interference (EMI)

Polymers For E-Mobility I Electrical Design Properties I Part 5 - Applications

Design Properties for Plastics Engineering - Engineering and High Performance Polymers (collection of all my posts)

Thanks for reading and #findoutaboutplastics

Greetings,

Herwig

Interested to talk with me about your plastic selection, sustainability, and part design needs - here you can contact me 

Interested in my monthly blog posts – then subscribe here and receive my high performance polymers knowledge matrix.
New to my Find Out About Plastics Blog – check out the start here section

Literature

[1] https://plastics.basf.com

[2] https://iopscience.iop.org/article/10.1088/2053-1591/abcb3b/pdf

[3] https://www.findoutaboutplastics.com/2020/11/plastic-part-failure-part-2-antidote.html

[4] https://www.findoutaboutplastics.com/2020/10/design-properties-for-engineers.html

No comments:

Post a Comment