Seiten

▼
Tuesday, 19 November 2024

High Performance Thermoplastic Selection - Imide-Based Polymers (PEI, PAI, PESI, TPI, PI) and Polybenzimidazoles (PBI, PBI+PEEK, PBI+PEKK) [Part 2B]

›
Hello and welcome to the Part 2B of our High Performance Thermoplastics selection blog series. Today we discuss imide-based polymers and Pol...
Thursday, 14 November 2024

New Online Tool - Calculate your Plastics CO2 equivalent (CO2e) Savings Potential

›
Hello and welcome to this post. I created an online calculator which allows you to quickly calculate the CO2 equivalent (CO2e) savings poten...
Wednesday, 6 November 2024

Design Properties for Engineers: Dynamic Mechanical Analysis (DMA) of Ultra Performance Polymers (PBI and PBI blends)

›
Hello and welcome to a new post on design properties for engineers. In today’s post we discuss the storage modulus E’ measured by DMA of the...
Sunday, 27 October 2024

My Guest-Contribution in "Sustainable medical technology: Rethinking plastics in medical technology" by BIOPRO Baden-Württemberg GmbH

›
Hello and welcome to a new blog post. Today I show you an article written by Dr. Ruth Menßen-Franz from the BIOPRO Baden-Württemberg GmbH t...
Friday, 25 October 2024

Rule of Thumb in Polymer Injection Moulding: Fast Estimation of Cooling Time

›
Hello and welcome to another Rule of Thumb post. Today we discuss how to fast estimate the cooling time in injection moulding.  Main influe...
Sunday, 6 October 2024

Rule of Thumb in Polymer Engineering: How Economy of Scale Can Lower Costs

›
 Hello and welcome to this new Rule of Thumb post. More Rule of Thumbs can be found in my section "Start here" .  Economy of Scale...
Friday, 4 October 2024

Polymer Selection Funnel Example - Smartphone Front Bezel (Consumer Electronics Material Selection)

›
Hello and welcome to another polymer material selection example for which we use the POMS-Funnel Method (in detail explained here  and in t...